A team of MIT researchers has developed a groundbreaking wireless receiver that could transform the future of Internet of Things (IoT) devices by dramatically improving energy efficiency and resilience to signal interference.

Designed for use in compact, battery-powered smart gadgets—like health monitors, environmental sensors, and industrial trackers—the new chip consumes less than a milliwatt of power and is roughly 30 times more resistant to certain types of interference than conventional receivers.

“This receiver could help expand the capabilities of IoT gadgets,” said Soroush Araei, an electrical engineering graduate student at MIT and lead author of the study, in a media statement. “Devices could become smaller, last longer on a battery, and work more reliably in crowded wireless environments like factory floors or smart cities.”

The chip, recently unveiled at the IEEE Radio Frequency Integrated Circuits Symposium, stands out for its novel use of passive filtering and ultra-small capacitors controlled by tiny switches. These switches require far less power than those typically found in existing IoT receivers.

A key innovation lies in the chip’s clever use of a phenomenon called the Miller effect, which allows small capacitors to perform like larger ones. This means the receiver achieves necessary filtering without relying on bulky components, keeping the circuit size under 0.05 square millimeters.

Traditional IoT receivers rely on fixed-frequency filters to block interference, but next-generation 5G-compatible devices need to operate across wider frequency ranges. The MIT design meets this demand using an innovative on-chip switch-capacitor network that blocks unwanted harmonic interference early in the signal chain—before it gets amplified and digitized.

Another critical breakthrough is a technique called bootstrap clocking, which ensures the miniature switches operate correctly even at a low power supply of just 0.6 volts. This helps maintain reliability without adding complex circuitry or draining battery life.

The chip’s minimalist design—using fewer and smaller components—also reduces signal leakage and manufacturing costs, making it well-suited for mass production.

Looking ahead, the MIT team is exploring ways to run the receiver without any dedicated power source—possibly by harvesting ambient energy from nearby Wi-Fi or Bluetooth signals.

The research was conducted by Araei alongside Mohammad Barzgari, Haibo Yang, and senior author Professor Negar Reiskarimian of MIT’s Microsystems Technology Laboratories.

On June 12, 2025, a tragic aviation accident struck Ahmedabad, India when a regional passenger aircraft, Air India flight A1-171, crashed during take-off at Sardar Vallabhbhai Patel International Airport. According to preliminary reports, the incident resulted in over 200 confirmed casualties, including both passengers and crew members, and several others are critically injured. The aviation community and scientific world now turn their eyes not just toward the cause but also toward understanding the complex science behind what should have been a routine take-off.

How Do Aircraft Take Off?

Take-off is one of the most critical phases of flight, relying on the precise orchestration of aerodynamics, propulsion, and control systems. Here’s how it works:

1. Lift and Thrust

To leave the ground, an aircraft must generate lift, a force that counters gravity. This is achieved through the unique shape of the wing, called an airfoil, which creates a pressure difference — higher pressure under the wing and lower pressure above — according to Bernoulli’s Principle and Newton’s Third Law.

Simultaneously, engines provide thrust, propelling the aircraft forward. Most commercial jets use turbofan engines, which accelerate air through turbines to generate power.

2. Critical Speeds

Before takeoff, pilots calculate critical speeds:

• V1 (Decision Speed): The last moment a takeoff can be safely aborted.
• Vr (Rotation Speed): The speed at which the pilot begins to lift the nose.
• V2 (Takeoff Safety Speed): The speed needed to climb safely even if one engine fails.

If anything disrupts this process — like bird strikes, engine failure, or runway obstructions — the results can be catastrophic.

Environmental and Mechanical Challenges

Factors like wind shear, runway surface condition, mechanical integrity, or pilot error can interfere with safe take-off. Investigators will be analyzing these very aspects in the Ahmedabad case.

The Bigger Picture

Take-off accounts for a small fraction of total flight time but is disproportionately associated with accidents — approximately 14% of all aviation accidents occur during take-off or initial climb.

A new type of fuel cell developed by MIT researchers could represent a pivotal breakthrough in the race to decarbonize heavy transportation. Designed around liquid sodium metal, the innovation offers more than triple the energy density of today’s lithium-ion batteries — potentially clearing a major hurdle for electric-powered aviation, rail, and maritime travel.

Unlike traditional batteries that require time-consuming recharging, this system operates like a fuel cell that can be refueled quickly using liquid sodium — a cheap, abundant substance derived from salt. The technology, which uses air as a reactant and a solid ceramic electrolyte to facilitate the reaction, was tested in lab prototypes and demonstrated energy densities exceeding 1,500 watt-hours per kilogram — a level that could enable regional electric flight and clean shipping.

“We expect people to think that this is a totally crazy idea,” said Professor Yet-Ming Chiang, lead author and Kyocera Professor of Ceramics, in a media statement. “If they didn’t, I’d be a bit disappointed because if people don’t think something is totally crazy at first, it probably isn’t going to be that revolutionary.”

Chiang explained that current lithium-ion batteries top out at around 300 watt-hours per kilogram — far short of the 1,000 watt-hours needed for electric aircraft to become viable at scale. The new sodium-based cell meets that benchmark, which could enable 80% of domestic flights and drastically reduce aviation’s carbon footprint.

Moreover, the sodium-fueled system offers environmental benefits beyond zero emissions. Its chemical byproduct, sodium oxide, reacts spontaneously in the atmosphere to capture carbon dioxide and convert it into sodium bicarbonate — better known as baking soda — which may help counteract ocean acidification if it ends up in marine environments.

“There’s this natural cascade of reactions that happens when you start with sodium metal,” Chiang said. “It’s all spontaneous. We don’t have to do anything to make it happen, we just have to fly the airplane.”

The team has already created two functioning lab-scale prototypes: one vertical and one horizontal model. In both, sodium gradually reacts with oxygen from air to generate electricity, and a moist air stream improves the process by allowing liquid byproducts to be expelled more easily.

Karen Sugano, one of the MIT doctoral students on the project, noted, “The key was that we can form this liquid discharge product and remove it easily, as opposed to the solid discharge that would form in dry conditions,” she said in a media statement.

The researchers have founded a startup, Propel Aero, housed in MIT’s startup incubator The Engine, to scale the technology. Their first commercial goal: a brick-sized fuel cell capable of powering a large agricultural drone — expected to be ready within a year.

Chiang emphasized the economic and safety benefits of using sodium, which melts just below 100°C and was once mass-produced in the U.S. for leaded gasoline production. “It reminds us that sodium metal was once produced at large scale and safely handled and distributed around the U.S.,” he said.

Critically, the fuel cell design also avoids many safety concerns of high-energy batteries by physically separating the fuel and oxidizer. “If you’re pushing for really, really high energy density, you’d rather have a fuel cell than a battery for safety reasons,” Chiang said.

By reviving and reimagining sodium-metal chemistry in a practical, scalable form, the MIT team may have lit the path toward clean, electrified transportation systems — from the skies above to the oceans below.